24 geosynthetic products in 6 categories — all factory-direct, all customizable to your project specification.
Impermeable barrier systems for containment of liquids and gases — HDPE geomembranes, bentonite liners and composite liners.
100% virgin HDPE liner, 0.25–3.0 mm, smooth or textured.
View Details →
Sodium bentonite sandwiched between geotextiles — a self-healing clay barrier.
View Details →
Nonwoven geotextile bonded with HDPE membrane — barrier plus protection in one roll.
View Details →Separation, filtration, drainage and reinforcement fabrics in nonwoven and woven constructions, 80–1200 g/m².
PET/PP needle-punched fabric, 80–1200 gsm, up to 7 m wide.
View Details →
High-tenacity PET/PP woven fabric for reinforcement with minimal elongation.
View Details →
PP/PE ground cover that blocks weeds and retains soil moisture.
View Details →
Geogrid bonded with nonwoven geotextile — reinforcement, separation and filtration in one.
View Details →Soil reinforcement grids in six types — uniaxial, biaxial, triaxial, steel-plastic, PET and fiberglass — for roads, retaining walls and mining.
One-way stretched PE/PP grid, ultimate tensile strength up to 210 kN/m.
View Details →
PP grid stretched in both directions for base stabilization.
View Details →
Hexagonal HDPE grid with triangular apertures for multi-directional load transfer.
View Details →
Steel-wire reinforced PE grid, GSZ 30–150 kN/m, built for heavy loads and marine works.
View Details →
Warp-knitted polyester grid coated with bitumen/PVC, 20–1000 kN/m.
View Details →
Fiberglass grid with superior thermal stability for asphalt overlays.
View Details →Three-dimensional confinement and permeable paving systems for slopes, load platforms and grass-paved parking areas.
Subsurface water management: dimpled drainage boards, drainage cells, geocomposite drains and rainwater storage modules.
HDPE dimpled sheet for waterproofing and drainage, dimple heights 8–40 mm.
View Details →
Lightweight 3D drainage module, 400/500 mm panels, void area >67%.
View Details →
HDPE drain core heat-bonded with filament geotextile filter.
View Details →
PP modular storage crates, 95% void volume, 400–660 kN/m² compressive strength.
View Details →Coastal, river and slope protection: geotubes, gabions, geomats, concrete mattresses and cement blankets.
High-strength PP woven tubes in widths up to 20 m for dewatering and marine structures.
View Details →
Galvanized or PVC-coated wire mesh boxes for erosion control and landscape walls.
View Details →
3D entangled monofilament mat, >90% void space, for vegetated slope protection.
View Details →
Double-layer woven formwork filled in-situ with fluid concrete.
View Details →
Concrete on a roll — flexible fabric that hardens on hydration, ≥C40 strength.
View Details →Send us your project details and get a quotation with technical datasheets within 24 hours.
